How Much Does Crown Molding Installation Cost in Naples, FL?

Naples pricing is 18% above the national average. Updated for 2026.

Based on local labor rates, varied climate conditions, and Naples's diversified economy.See our methodology

Low End
$708
Average
$1,770
High End
$3,540
per room
Ad

Crown Molding Installation Pricing in Naples, FL

Naples is a high-cost market where crown molding installation runs about 18% above the national average. The city's diversified economy supports higher wages, which translates to elevated contractor rates. With a population of 20K, competition among providers exists but demand keeps prices firm.

Local climate plays a direct role in crown molding installation costs here. Hot humid summers drive HVAC and pest control demand; hurricane risk in coastal areas.

Market-specific factors matter in Naples: growing market with competitive contractor rates.

Naples has moderate permitting requirements. Depending on the scope of your crown molding installation project, you may need local permits. A licensed contractor will handle the permitting process as part of the job in most cases.

Naples vs National Average

Naples Average
$1,770
National Average
$1,500
Difference
+18%
Ad

What Affects Crown Molding Installation Cost in Naples?

Material

Foam/polystyrene: $1-$4/linear ft. MDF: $2-$5/ft. Pine/poplar: $3-$8/ft. Hardwood: $6-$15/ft

Installation

Labor: $3-$8/linear ft for basic profiles. Complex multi-piece: $8-$15/linear ft

Room Size

Average room (50 linear ft): $500-$1,500 installed. Large room (80 ft): $800-$2,500

Naples Market Conditions

growing market with competitive contractor rates

Local Climate Impact

hot humid summers drive HVAC and pest control demand; hurricane risk in coastal areas

๐Ÿ“ Crown Molding Installation in Naples Cost Calculator

Get a personalized estimate based on your project details

Get Free Renovation Estimates

Connect with licensed contractors for your project.

Free, no obligation. Your information is secure and never shared.

Top-Rated Crown Molding Installation Pros in Naples, FL

3 providers

Craftsman Construction

โœ… VERIFIED
โ˜…โ˜…โ˜…โ˜…โ˜…4.6(76 reviews)
๐Ÿ“ 717 Pine Rd, Naples, FL๐Ÿ—๏ธ Since 2007
โœ“ Licensedโœ“ InsuredBBB: A+โšก Usually responds in 3 hours

Artisan Interiors

โ˜…โ˜…โ˜…โ˜…โ˜…3.9(29 reviews)
๐Ÿ“ 166 Pine Rd, Naples, FL๐Ÿ—๏ธ Since 1994
โœ“ Licensedโœ“ InsuredBBB: A+

BuildRight Kitchen & Bath

โ˜…โ˜…โ˜…โ˜…โ˜…3.6(58 reviews)
๐Ÿ“ 402 Market St, Naples, FL๐Ÿ—๏ธ Since 2017
โœ“ Licensedโœ“ Insured

Are You a Crown Molding Installation Professional?

Get listed on CostWhale and reach thousands of customers searching for crown molding installation in Naples, FL.

๐Ÿ” Get Free Quotes from Local Pros

Compare prices from pre-screened contractors in your area. Free, no-obligation estimates.

Get Free Quotes โ†’

* CostWhale may earn a commission. This doesn't affect our pricing data or recommendations.

Tips to Save on Crown Molding Installation in Naples

  • 1.MDF/foam crown molding ($1-$4/ft) looks identical to wood ($5-$15/ft) when painted
  • 2.Install multiple rooms at once for a per-room discount from contractors
  • 3.Simple profiles are easier to cut and install โ€” complex multi-piece profiles cost 2-3x more in labor
  • 4.Foam crown molding is lightweight and can be installed with adhesive (DIY-friendly)
Ad

๐Ÿ“ˆ Crown Molding Installation in Naples Cost Trends (2020โ€“2024)

Prices have increased +17.8% over the last 5 years

$1,503
2020
$1,566
2021
$1,668
2022
$1,715
2023
$1,770
2024
YearNational AvgYoY Change
2020$1,503โ€”
2021$1,566+4.2%
2022$1,668+6.5%
2023$1,715+2.8%
2024$1,770+3.2%

Based on national averages adjusted for annual inflation. Actual costs vary by location and project scope.

๐Ÿ’ฌ What Did You Pay?

Real costs reported by homeowners for Crown Molding Installation in Naples

$1,839
Avg Reported
$1,287
Lowest Reported
$2,667
Highest Reported

Recent Reports

$1,400
Dallas, TX ยท Jan 2024
โ˜…โ˜…โ˜…โ˜†โ˜†
$1,985
Chicago, IL ยท Feb 2024
โ˜…โ˜…โ˜…โ˜…โ˜…
$1,776
Phoenix, AZ ยท Mar 2024
โ˜…โ˜…โ˜…โ˜†โ˜†
$1,666
Denver, CO ยท Apr 2024
โ˜…โ˜…โ˜…โ˜†โ˜†
$1,839
Atlanta, GA ยท May 2024
โ˜…โ˜…โ˜…โ˜…โ˜†
$2,289
Seattle, WA ยท Jun 2024
โ˜…โ˜…โ˜…โ˜…โ˜†

Frequently Asked Questions

Is crown molding outdated?

No โ€” crown molding remains a timeless design element. Simpler, cleaner profiles (2-4 inch) are trending over ornate Victorian styles. It consistently adds perceived value and sophistication to a home's interior.

Can I install crown molding myself?

It's a moderate DIY project. The hardest part is cutting accurate miter and cope joints at corners. A compound miter saw is essential. Foam crown molding is the easiest to DIY. Budget a full day per room for a first-timer.

Why does crown molding installation cost different in Naples than other cities?

Naples's costs reflect local labor rates driven by the diversified economy, varied climate conditions that affect materials and scheduling, and moderate permitting requirements. The balanced labor market also influences competitive pricing.

Crown Molding Installation Cost in Nearby Cities

Related Cost Guides for Naples

Popular Services in Naples

๐Ÿ’ฐ Get Weekly Cost-Saving Tips

Join 10,000+ smart homeowners. Unsubscribe anytime.

๐Ÿ”’ No spam, ever. We respect your privacy.
Ad